Though, a slow and sluggish WiFi signal complicates your online lifestyle, still there a plenty of ways you can boost the internet or WiFi signals to improve productivity as well as the enjoyment. Nowadays, loads of people for instance, like to extend the internet range outside during warmer months of the year so they can enjoy the outdoors if they switch to extender Linksys.
On the other hand, for other people browsing speed might be infuriating the house or a building. A particular room might be in a wireless dead zone or poor connectivity area, or they can’t stream their favorite shows or movies without buffering or signal breakage.
So, if that sounds like you, consider trying a combination of suggestions in this post in order to improve the signal strength and expand the wireless range all over the house and to see how better your network connection can be.
1. Relocate your Existing Router or the Gateway Device
The WiFi range of typical home network often doesn’t cover the dead zones and poor connectivity area of the entire house. Distance from the existing router and physical obstructions between your router and the devices affect a lot on the signal strength. Well, the placement of a broadband WiFi router or the other network gateway device directly affects its signals and become a barrier for Linksys extender login and setup.
What to do now?
Experiment by moving the main router of yours in different locations that can best avoid physical obstructions and radio interference that are supposed to be two common range limiters for WiFi devices or equipment.
On the other hand, typical sources of WiFi signal impediments in residences include Bluetooth speakers/ devices, brick walls, large metal appliances, and microwave ovens, cordless phones or electronic gadgets that are in use. Mostly, raising the height of the router and placing it in an open area improves the range because many obstructions are located at waist height or floor.
2. Change the Frequency as Well as the WiFi Channel Number
Range-limiting wireless interference is also caused by neighboring WiFi networks that use the same wireless radio channel number or frequency.
Solution: Changing channel numbers on your WiFi equipment can eliminate this interference and improve the overall signal strength of your home networking system. Almost, every router consists of a 2.4GHz band, but if you have a dual-band router – one with both 2.4GHz and 5GHz bands – you will likely experience less interference on the 5GHz band.
What to do now?
Have a word with our technical department on toll-free number 1-844-726-2255.
3. Update The Router Firmware
Router’s manufacturer makes improvements to their software and issues firmware updates in order to improve the performance of their Linksys device. To resolve this issue, you are supposed to update the router firmware regularly even if you aren't experiencing problems with the router.
What to do now?
Nowadays, every router has the update process built in, but older models require you to find the update and download it immediately.
Solution: Upgrade the gateway radio antennas or your existing wireless router timely.
On the other hand, consider upgrading the antennas on your router with the most powerful directional antenna, which sends the signal in a specific direction rather than in all directions.
Know how a Linksys router WPS button works from our tech support team.
4. Include a Signal Amplifier Also
Remember that a bidirectional booster amplifies the wireless signal in both transmitting and receiving direction. It is an important point because WiFi transmissions are two-way radio communication.
What to do now?
To fix this issue on your own, add a WiFi signal amplifier/ signal booster to your main router, access point, or wireless client at the place where an antenna can connect easily.
5. Kick the Out-of-Date Router Away
Nowadays, in every other field, equipment manufacturers make improvements to their products regularly. So, if you have been using the same router for days, months or years, you will experience tremendous WiFi improvements by switching to a current-generation or latest and up-to-date firmware of the router. 802.11ac is known as the current standard for routers.
So, if you are running a router on standard 802.11g or 802.11b, then you can't do much to improve your internet of wireless signals. Note it down - even speedier 802.11n routers can't keep up with ac standard.
What to do now?
Purchase a new but the latest version of the router that runs on the current standard safely, easily, and smoothly without any signal failure.
Looking for how to setup a Linksys range extender? Don’t worry as you have reached the right place. Without any fear or hesitation drop your feedback, questions, or queries below whatsoever is in your mind and we promise that we will get back to you with a solution shortly.
Charlie
